5
6.5 RS-232 Protocols
Command
Description
A1~A4
Switch Output A to 1~4
B1~B4
Switch Output B to 1~4
AB...1~AB...4
Switch Output A B ... to 1~4 at
the same time
SETIP <IP> <SubNet> <GW>
Setting IP. SubNet. GateWay
<SataicIP>
RSTIP
IP configuration was reset to
factory default<DHCP>
IPCONFIG
Display the current IP config
P0
Power Off
P1
Power On
I1~I4
Switch all the output to 1~4
ST
Display the current matrix state
and F/W version
RS
System Reset to A1, B1
EM
Setting EDID MODE. 1-STD 2-TV
?
Display all available commands
Note: All the RS-232 command will be not executed unless followed
with a carriage return and all command are case-insensitive.
