7.2 Rear panel
1
2
3
4
5
q
IR OUT ALL: This slot is where you connect the IR blaster cable included in
the package. Place it in a way so that all sources and devices are able to
receive the infrared signal.
IR OUT A~D: These slots are where you connect the included IR blaster
cables. Place them far away so that only the designated equipment will
be able to receive the infrared signal.
IR IN ALL: This is where you connect the IR receiver cable included in this
package. Place it anywhere you wish to control the source devices, using
their existing remotes.
IR IN 1~4: These slots are where you connect the IR receiver cables
in¬cluded in the package. Place it near each display for receiving an IR
signal through the existing remote control.
DC 5V: Plug the 5V DC power supply into the unit and connect the
adap¬tor to an AC outlet.
4
