CYP CHDBT-1H3CL, Руководство по эксплуатации

Страница: 9 / 16

4
6.2 Rear Panel
MODE LINK MODE LINK MODE LINK
IR IN IR OUT
2 3 1
CAT5e / 6 / 7 OUT
1 2 3
1
IR IN: Connect the supplied IR Receiver cable for IR signal
reception. Ensure that remote being used is within the direct line-
of-sight of the IR Extender .
2
IR OUT: Connect the supplied IR Blaster cable for IR signal
transmission. Place the IR Blaster in direct line-of-sight of the
equipment to be controlled.
3
CAT5e/6/7 OUT 1~3: Connect to CAT5e/6/7 to HDMI Receivers with
a single CAT5e/6/7 cable each to extend the HDMI signal up to
100 m.
MODE LED: This LED will illuminate when the power is connected.
LINK LED: This LED will illuminate when connected to a Receiver unit
that is connected with a TV/monitor that is displaying the signal.