CYP CHDBT-1H1CL, Руководство по эксплуатации

Страница: 9 / 16

4
6.2 Rear Panel
POWER
DC 24V
CAT5e/6 OUT
IR 1
BLASTER USB LINK
IR 2
EXTENDER
2 1 3 4 5 7 6
1
POWER LED : The LED will illuminate when connected to an active
power supply.
2
DC 24V: Connect the 24V DC power supply to the unit and plug
the adaptor into an AC outlet.
3
IR 1 BLASTER: Connect the supplied IR Blaster cable for IR signal
transmission. IR signals received by an IR extender connected to
the receiver unit will be transmitted by this blaster. Place the IR
Blaster in direct line-of-sight of the equipment to be controlled.
4
IR 2 EXTENDER: Connect an IR extender cable for IR signal
reception. Signals received will be transmitted from any IR blaster
connected to the receiver unit. Ensure that the remote being used
is within the direct line-of-sight of the IR Extender
5
USB: This slot is reserved for firmware update only.
6
LINK LED: This LED will illuminate when connected to a receiver unit
that is connected with a TV/monitor that is displaying the signal.
7
CAT5e/6/7 OUT: Connect to a CAT5e/6/7 to HDMI Receiver (with
or without PoE) with a single CAT5e/6/7 cable each to extend the
HDMI signal up to 60 m.