CYP CH-V502TR, Руководство по эксплуатации, Страница: 8 / 32

3
5. FEATURES
• HDMI 2.0 and DVI 1.0 compatible
•
HDCP 2.2 and HDCP 1.x compliant
• Configurable as either a transmitter or a receiver
• 1 HDMI input
• 1 HDMI output (Functions as local monitor output in Transmitter
Mode)
• 1 analog stereo audio jack (Functions as an input in Transmitter
Mode or an output in Receiver Mode)
• 2 USB 2.0 (Type A) ports and 1 USB 2.0 (Mini B) port
• Ultra-light compression, lossless for most content
•
Extension up to 100m in Point-to-Point mode (with Cat.6A cable)
• Supports independent breakaway A/V matrix switching with
minimum latency, video wall generation, and multi-view
compositing (requires optional IP Master Controller/control software)
• Supports pass-through of 10/12-bit HDR sources (Point-to-Point and
Bypass modes only)
• Supports pass-through of audio formats including LPCM (up to 8
channels), Bitstream and HD Bitstream from HDMI sources
• Analog stereo audio extension, insertion and extraction (insertion
and extraction requires optional IP Master Controller/control
software)
• Bi-directional IR, RS-232, USB 2.0, and Ethernet extension
• Supports a special Simultaneous Mode for USB extension allowing
a host connected to a single transceiver to connect to up to 7
transceivers with USB devices connected (mass storage devices are
not supported in this mode)
• Unit can be powered directly by PoE when connected to a 10
Gigabit Ethernet (10GbE) switch that provides PoE (802.3at)
• Basic configuration via front panel buttons with an On-Screen
Display (OSD)
• Supports the use of an external control center (IP Master Controller)
or control software to provide expanded functionality (Contact
your authorized dealer for more information)