CYP CH-V501TR, Руководство по эксплуатации, Страница: 6 / 28

1
1. INTRODUCTION
This Transceiver is designed for high-quality, IP routable, AV extension
with minimum latency. Every Transceiver can be configured to
function as either a Transmitter or a Receiver, enhancing the flexibility
of any installation. By using a sophisticated ultra-light compression
scheme (lossless for most content) it’s a great solution for extending
4K HDMI audio/video streams and data. Advanced HDMI content
such as HDR (High Dynamic Range), 10-bit color and multi-channel
HD Bitstream audio can be transmitted in pass-through mode. The
use of high quality 10-Gigabit Ethernet ports and Cat.6A cable allows
for point-to-point transmission of the video signal up to 100m. Multiple
control and data signals may also be transmitted along with the audio
and video, including IR, RS-232, and Ethernet.
When combined with the optional control center or control software,
the functionality of the Transceiver expands exponentially. Multiple
Transceivers may be combined with one or more 10-Gigabit Ethernet
switches and the units can be used together to form a distributed
video matrix, a multi-viewer system, or a video wall system adding
to their flexibility in large event installations. The unit may also be
powered directly by PoE when connected via Cat.6A to a Gigabit
Ethernet switch that provides PoE (802.3af) allowing for great flexibility
in installation location. The built-in EDID and HDCP management
functionality enables the unit to fit into every situation. Basic
configuration of the unit can be achieved via front panel buttons
with an On-Screen Display (OSD). Advanced control requires optional
control software and a LAN connection.