CYP CH-514RXL, Руководство по эксплуатации, Страница: 9 / 16

4
6.2 Receiver Front and Rear Panels
CAT5e/6 IN DC 5V
CA
T5e/6 to HDMI
with IR
HDMI OUT IR2 OUT IR1 IN
RECEIVER
CAT5 e/6 IN DC 5V
CA
T5e/6 to HDMI
with IR
HDMI OUT IR2 OUT IR1 IN
RECEIVER
4 5 1 2 3
1
IR1 IN: Connect the supplied IR extender cable for IR signal
reception and transmission to IR1 OUT on the transmitter unit.
Ensure that the remote control being used is within the direct line-
of-sight of the IR extender.
2
HDMI OUT: Connect to a HDMI equipped TV/monitor for display of
the HDMI input source signal.
3
IR2 OUT: Connect to the supplied IR blaster for IR signal transmission to
the display equipment. Place the IR blaster in direct line-of-sight of
the equipment to be controlled.
4
DC 5V: Connect the 5V DC power supply to the unit and plug the
adaptor into an AC outlet.
5 CAT5e/6 IN: Connect to the transmitter unit with a single CAT5e/6/7
cable for transmission of all data signals. The yellow LED will illuminate
when both the transmitter and receiver are connected and are
powered. The green LED will illuminate when the device is connected
to the power supply.