CYP CH-507RX, Руководство по эксплуатации

Страница: 8 / 16

3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
Rear Front
RS-232 In
LAN
HDMI In
HDMI to CAT5e/6 with LAN/IR/RS232
Transmitter
CAT5e/6 Out
Link
IR2 Extender
IR1 Blaster
DC 24V
Power
2 3 1 6 4 7 8 9 5
1 HDMI In
Connect to HDMI source equipment such as a DVD or Blu-ray
player.
2
LAN
Connect to an internet or network connection.
3
RS-232 In
Connect to a PC or laptop with D-Sub 9 pin male cable for the
transmission of RS-232 commands.
4
Power LED
This blue LED will illuminate when the device is connected to a
power supply.
5 DC 24V
Plug the 24 V DC power supply into the unit and connect the
adaptor to an AC outlet.
6
IR 1 Blaster
Connect to the supplied IR blaster cable for IR signal transmission.
Place the IR blaster in direct line-of-sight of the equipment to be
controlled.
7
IR 2 Extender
Connect to the supplied IR receiver cables for IR signal reception.
Ensure that remote being used is within the direct line-of-sight of
the IR extender.