CYP CH-506TXPLRXPL, Руководство по эксплуатации, Страница: 9 / 16

4
6.2 Receiver Front and Rear Panels
Power
Link
CAT 5e /6 In
IR1 Extender
RS-232 Out IR2 Blaster
HDMI Out
Receiver
3 1 2
4 5 6 7
1 Power LED
2
LINK LED
This LED will illuminate in blue when the devices are connected
with a CAT5e/6 cable. When the data transmission accrue with
error the LED will be blinking.
3 CAT5e/6 IN
Connect to the transmitter unit with a single CAT5e/6 cable for
transmission of all data signals.
4 RS232 OUT
Plug the 3.5Ø to D-Sub 9 pin male cable included in the package
and connect to the device that is to be controlled by RS-232
commands
5
IR2 Extender
Connect to the supplied IR extender cable for IR signal reception.
Ensure that remote being used is within the direct line-of-sight of
the IR extender.
6
IR2 Blaster
Plug the IR blaster included in the package for IR signal sending
from the receiver side.
7
HDMI OUT
Connect to a HDMI equipped TV/monitor for display of the HDMI
input source signal.