CYP CH-506RXWP, Руководство по эксплуатации, Страница: 8 / 16

DRAFT
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter
LINK
POWER
DC 24V
RS232
IN
IR 2
IN
IR 1
OUT
HDMI
IN
Rear Front
8 2 3 1 4
5
6
7
1
RS-232 IN: This slot is to connect with 3.5Ø phone jack RS-232 cable
from PC/NB equipment for sending RS-232 commands.
2 IR 2 IN: This slot is to connect with the IR receiver cable included in
the package for IR signal receiving.
3
IR 1 OUT: This slot is to connect with the IR blaster cableincluded in
the package for IR signal transmitting.
4
HDMI IN: This slot is to connect with HDMI source equipment such
as DVD/Blu-ray player.
5 POWER LED: This green LED will illuminate when the device is
attached with power supply.
6
LINK LED: This yellow LED will illuminate when the both CAT5e/6
input and output signal is connected.
7 DC 24V: This slot is where you plug the 24V DC power supply into
the unit and connect the adaptor to an AC outlet.
8
CAT5e/6 Out: Connect to the receiver unit with a single CAT5e/6
cable for transmission of all data signals.