manualshive.com logo in svg

CYP CH-331H-TX, Руководство по эксплуатации, Страница: 13 / 44

Поделиться
Скачать
CYP CH-331H-TX Скачать руководство пользователя страница 13

8

•   Utilities

The Utilities window allows users to reset/reboot the unit, configure the 

EDID behavior, and send Telnet commands to the unit.

1)  Factory Default: 

Click this button to return the unit to its factory 

defaults.

 

Note: Networking configuration details will not be reset.

2) Reboot: 

Click this button to reboot the unit.

3)  Reset EDID to Default Value: 

If the EDID received from the primary 

Receiver unit (selected via a checkbox on the preferred Receiver 

in Multicast mode) has compatibility issues with the connected 

HDMI source, the internal HDMI EDID (up to 1080p w/audio) can 

be selected. Please press “Apply” after making the selection.

 

Note: This EDID setting will be reset if the unit is rebooted.

4)  Console API Command: 

Individual Telnet commands may be sent 

to the unit by using the “Console API Command” text entry field 

and pressing “Apply”. Any responses from the unit will be displayed 

in the “Output” field.

Содержание CH-331H-TX













































Отзывы:

Нет отзывов