CYP CH-1106TX & RX, Руководство по эксплуатации, Страница: 9 / 16

4
6.2 Receiver Front and Rear Panels
VIDEO DDC
CAT6 INPUT
POWER 5V
IR
Receiver
HDMI OUTPUT
Rear Front
1 2 3 4 5
1
VIDEO INPUT
Connect the video output of the transmitter to the video input of
the receiver using a CAT5e/6 cable.
2
DDC INPUT
Connect the DDC output of the transmitter to the DDC input of the
receiver using a CAT5e/6 cable.
3
POWER 5V
Plug the 5 V DC power supply into the unit and connect the
adaptor to an AC outlet.
4
HDMI OUTPUT
Connect the HDMI output to the HDMI or DVI input (with a HDMI to
DVI adaptor) of a display such as an HDTV or HD monitor.
5
IR RECEIVER
Connect to the supplied IR extender cable for IR signal reception.
Ensure that remote control being used is within the direct line-of-
sight of the IR extender.