CYP CETH-4HDMI, Руководство по эксплуатации

Страница: 8 / 16

4
7.2 Rear Panel
1 3 4 5 6 7
2
①
. EDID Control switch: Each EDID control switch is determined if you are
going to use the EDID from the display or use an onboard EDID. When
select to TV, the EDID will attach to output TV. When selected to INT, the
EDID will become onboard EDID and the factory default setting is in TV
mode.
2
. HDMI output: Connect each of the output ports to the HDMI display. The
system can let you show the same content on each HDMI output,
different content on each HDMI output or you can extend an image
to cover all four HDMI displays. For more detail please check section 9
(Using DisplayLink Manager) for mirror or video extension settings.
3
. Audio in: This slot is to insert the audio through the PC 3.5 phone jack.
When the audio is inserted, the HDMI output ports will support audio at
the same time.
4
. Mini USB IN: this port support mirror or video extension (via USB cable) to
your HDMI displays.
5
. Input USB/RJ45 switch: this switch allows users to choose input source
signal from USB or RJ45.
6
. RJ45 IN: This slot is to connect with CAT5e/6 cable from your network system
or PC/Laptop.
7
. DC 5V: This slot is where you plug the 5V DC power supply into the unit and
connect the adaptor to an AC wall outlet.