CYP CDPS-U4H4HSA, Руководство по эксплуатации

Страница: 9 / 32

4
14
+/-: Press these buttons to move up/down under menu selection.
15
PRESET: Press “PRESET”, the OLED menu will show Preset then select
IN 1~4. Preset 5~8 selection, press IN 1/2/3/4 twice. Press “TAKE” to
confirm the selection or press “CANCEL” to exit the selection.
16
All: Press this button to select all outputs with an input selection.
17
LOCK: Press this button to lock all button functions on the panel.
Press 3 seconds to relieve the lock function.
18
LCM: Displaying Input and Outputs selection and menu selection.
6.2 Rear Panel
HDMI IN
1 2 3 4
HDMI OUT OPTICAL IN
A B C D
1 2
OPTICAL OUT
A B
AUDIO-CAT CONTROL
3C 4D SERVICE
RS232 IR IN DC 12V
1 2 3 4 5 6 7 8 9 10
1
HDMI IN: Connect from source equipments such as Blu-ray/DVD/
PS3 players, Set-Top-Box or any HDMI equipped source device for
input signal sending.
2
HDMI OUT: Connect to HDMI TV/display or HD Amplifier for output
image and or audio display.
3
OPTICAL IN: Connect from source equipment such as DVD, Blu-ray,
PS3 or etc. with audio signal.
4
OPTICAL OUT: Connect to active speaker or audio amplifier for
audio distribution.
5
AUDIO-CAT 3C/4D: Connect this port 3C to the AUDIO-CAT output
of the Transmitter unit and 4D to the AUDIO-CAT input of the
Receiver unit using CAT5e/6/7 cable.
With 192kHz sampling rate over a single CAT5e/6/7 cable up to
100m/328ft, 96kHz sampling rate up to 150m/492ft and 48kHz
sampling rate up to 300m/984ft.
6
SERVICE: This slot is reserved for firmware update use only.
7
CONTROL: Connect from PC/Laptop with active internet service
for WebGUI control with RJ-45 terminated cable.