CYP CDPS-4KQ, Руководство по эксплуатации

Страница: 16 / 36

11
COMMAND DESCRIPTION PARAMETER
SBV N1 Set TV Wall Vertical Bezel
Correction N1=0~255
RBEZ Request Current Bezel
Correction State NONE
SBEZ N1 Set Bezel Correction
Enable/Disable N1=0(Off), 1(On)
RMDN Request Unit ID Number NONE
SMDN N1 Set Unit ID Number to N1 N1=0~255
SWDE Reset All TV Wall Settings NONE
SHOT N1 Fast Setting TV Wall Format
from Hotkey N1 N1= 0(1x1) , 1(2x2), 2(3x3),
3(4x4), 4(5x5), 5(6x6),
6(2x3), 7(3x2), 8(3x4),
9(4x2), 10(4x3), 11(4x5),
12(1x2), 13(2x1), 14(1x3),
15(3x1), 16(1x4), 17(4x1),
18(2x4), 19(3x5), 20(5x4),
21(5x3), 22(6x2), 23(6x3)
SFAVE N1 Save Current TV Wall
Settings to N1 N1=1~5
RFAVE N1 Recall TV Wall Settings
from N1 N1=1~5
Note:
1. All the RS-232 command will be not executed unless followed with
a carriage return. All commands are insensitive.
2. RS-232 control is set to single device only, not for use with
Cascade/Bypass output's connection device.
3. Bold values are the default settings.