7. Operation Controls and Functions
7.1 Front & Right Panel
DP OUT1
1
1
DP OUT3
DP OUT2
①
DP OUT 1~3: Connect these slots with the output displays Display port
input port in order to send a signal.
Note:
It is suggested to use the same type/model of display in order
to get the optimal image quality. When the input source’s timing is
matched with the output display’s timing, the device will first
extend the image according to the numbers of the output
connected. If the input sources timing does not match with output
display’s timing the device will then split the signal to match the
number of the connected display to show an identical image.
(Detail information please refer to section 8. Timing table for
monitors).
7.2 Right Panel
1
2
3
OFF ON
DC 3.3V
DP IN
POWER
①
On/off switch: Push this switch to turn the device on or off. The green LED
will turn on when the device is switched on.
②
DC 3.3V: This slot is where you plug the 3.3V DC power supply into the
unit and connect the adaptor to an AC outlet.
③
DP IN: This slot is where you connect the input source equipment such as
a PC or any output device that has a DisplayPort.
Output Resolution
1920 x 1200 / 1920 x 1024
Input port
1 x DisplayPort
Output ports
3 x DisplayPort
Power Supply
3.3V / 1.5A DC (US/EU standards, CE/FCC/UL certified)
ESD Protection
Human body model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
Dimensions(mm)
100 (W) x 70 (D) x 20 (H)
Weight(g)
90
Chassis Material
Plastic
Silkscreen Color
White
Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature
-20°C~60°C / -4°F ~ 140°F
Power Consumption
3W
Relative Humidity
20~90% RH (non-condensing)
3
