CYP CA-DVI250R, Руководство по эксплуатации, Страница: 6 / 12

DDC CTI
VIDEO
DC 5V
EQUALIZER 1 2 GAIN
ADJUST
CTI
250M
150M
100M
50M
MIN MAX
CAT5 INPUT
6.2 Receiver’s Front Panel
①
CTI dip switch – Setting CTI by using the twin jumpers to adjust the
optimized setting for different distance of connection.
②
EQUALIZER – Use this switch to adjust Sharpness/Peak over long distance
by turning right or left.
③
GAIN – Use this switch to adjust Brightness/Contrast by turning right or left.
④
DDC CAT 5 INPUT – Connect the DDC input to the DDC output of the
transmitter with CAT-5/CAT-5E/CAT-6 cable.
Note:
For advanced user only, if it's known that the DDC or HDCP data
are required for the source and the display, you can use a single CAT-5
cable for the VIDEO connection only.
⑤
VIDEO CAT 5 INPUT – Connect the VIDEO input to the Video output of the
transmitter with CAT-5/CAT-5E/CAT-6 cable.
⑥
Power Jack – Connect with 5V / 2.6A power adaptor with power supply.
CTI 1 2
150 - 250m
↑ ↑
100 - 150m
↓ ↑
50 - 100m
↑ ↓
50 m
↓ ↓ ↓
1 2 3 4 5 6
3