14
source selection mode. When enabled, the unit will automatically
switch the input routed to the local HDMI output whenever a new
source is detected or if the current source is lost.
6) VOIP Out Auto Mode:
Enable or disable the AVoIP streaming output’s
automatic source selection mode. When enabled, the unit will
automatically switch the input routed to the AVoIP output whenever a
new source is detected or if the current source is lost.
INFORMATION
2ND LEVEL
3RD LEVEL
Resolution
[Current Source Resolution]
Status
[Current Transceiver Mode]
FW Version
[Current Firmware Version]
IP
[Current IP Address]
MAC
[Unit’s MAC Address]
SN
[Unit’s Serial Number]
1) Information:
Shows details of the unit’s current status including
detected source resolution, transceiver mode, firmware version, IP
address, MAC address, and serial number.
FACTORY SETTING
2ND LEVEL
3RD LEVEL
Are you sure?
NO
Yes
1) Factory Setting:
Selecting YES will reset the unit’s settings back to
their factory defaults.
