CynkoMet T-104, Инструкция по использованию и эксплуатации

Страница: 84 / 128

Cynko Met
T-104/6
84
7. Transport
The trailer is prepared for sale in a fully assembled state and
does not require packing. Only technical - physical documentation
of the machine and the cable connection of the electrical system
are subject to packing, and as to the optional accessories: the
warning triangle, tarpaulin with a frame and plate distinguishing
slow-moving vehicles.
The supply of the trailer to the user is done by
independent transport after connecting with the tractor or
automobile (in this case, the trailer because of the height can be
mounted on the platform of the transport mean on the hubs -
with unscrewed and taken off wheels or on wheels, but with
disassembled and folded upper extensions
Loading and unloading a trailer from a car should be
carried out using the loading ramp with a tractor or using a crane
or lever. During operation, observe the general safety rules with
handling operations. Persons operating the reloading equipment
must have the required permissions to use these devices.
When loading / unloading using the tractor, the trailer
must be properly connected with the tractor according to the
requirements contained in this manual. The trailer braking system
must be running and tested before running off or driving on the
ramp.
When loading / unloading the trailer by crane or lever to
lift, lift it with the help of approved fasteners designed to carry the
load with sufficient capacity. The belts must be in good condition,
they cannot show any signs of damage.
The belts should be placed under the lower frame of the
trailer in such places that when lifting the trailer the belts do not