www.cymaticaudio.com
Page 3
Quick Start Guide
Connections
HDD
:
Connect your FAT-32 formatted USB hard disk to this connector.
USB Interface
:
Connect to a USB port on your OSX / Windows computer, to use your X32
console as a 32-input, 32-output audio interface. This interface is not
available when a USB hard disk is connected to the HDD port.
Network
:
Connect this port to your local area network. You can then use the
uRemote software (Windows / OSX / iOS) to remotely control all features
of your uTrack-X32 option card.
User Interface
REC button
:
This button illuminates in red when recording is active.
Push it to start a new recording.
Push it again to start recording a new song.
Long-press it to stop recording.
Format button
:
Push to format (erase) the connected hard disk. When the Status LED is
blinking yellow, press the format button again to start formatting.
Note:
all data will be lost.
Status LED
:
This multi-color LED indicates USB drive status and activity:
Color
State
Description
Green
On
The USB drive is ready to record
Yellow
On
USB drive is ready, but remaining space is
less than 3 hours.
Yellow
Blinking
Waiting for confirmation to start formatting
Red
On
USB drive is full; no room to record
Red
Blinking
USB drive is not formatted correctly and is
not ready to record
