10
Send "angle+pspace+angle" to tracker, it will reply" angle ok".
e.g. angle123456
040
The angle must be 3 digits Arabic numbers, default angle value is 30 degree.
GPS drift suppression
This function is deactivated by default, send "spassword" to tracker, it will reply"
suppress drift ok". The GPS data stop updating if vehicle is not driving (ACC is OFF) and latitude
and longitude always keep same, and GPS data updates automatically when vehicle is moving.
Cancel: send "nospassword" to tracker, it will reply" nosuppress ok ".
Exact street address
You must set up the APN of your local GSM network for the SIM card in tracker first before using
this function, if there is user name and password for GPRS login, (Please refer to 6.36 to configure
the APN, user name and password for GPRS login.)
After configure the APN, send "password" to device, it will reply SMS including real
street/address name. For example: No.113, Guankou 2nd Rd, Nantou, Nanshan district, Shenzhen,
Guangdong, china. e.g. address123456
Location based service (LBS) / Cell-ID Locating
If the tracker cannot establish a solid GPS Fix, it will calculate its location using Cell-ID GSM
locating, Location reports will include the GPS coordinates of the last known positions as well as a
LAC code, Entering the LAC code to the “Manual Track” menu of web tracking platform
www.gpstrackerxy.com will enable you to see the tracker’s current location. You can also send
command “password” to the tracker to request exact address, track will automatically
switch to tracking by LBS in GPRS mode. Accuracy of LBS depends on the distance to the nearest
GSM Network Cell Tower or Base Station.
Note: This feature can be used normally in most areas according to the signal of GSM network. It m
ay not be available in some areas.
Monitor
The command to switch between Track mode and Monitor mode are “tracker” and “monitor”.
The default mode is “track” (Track mode).