Options
Settings
Adjusting the water softener. Select a setting depending
on the hardness of the water supply. It is important that
this setting is correct!
2:00 - 2:09
Water hardness
2.
Recommended
setting
French water
hardness scale
German water
hardness scale
2:00
0-9°fH
0-5°dH
2:01
10-14°fH
6-8°dH
2:02
15-20°fH
9-11°dH
2:03
21-25°fH
12-14°dH
2:04
26-34°fH
15-19°dH
2:05
35-43°fH
22-24°dH
2:06
44-52°fH
25-29°dH
2:07
53-70°fH
30-39°dH
2:08
71-88°fH
40-49°dH
2:09
89°fH
50°dH
Do not forget to put salt in the salt compartment after
you have set the water softener to 2:01 - 2:09.
For a water supply with a hardness under 6°dH (9°fH),
select 2:00. The water softener is deactivated and no
salt is needed.
Pre-selected at factory: 04
You can activate this setting when using 3-in-1/ All-in-
one detergent. The dishwashing programs automatically
adapt to provide the best possible dishwashing and
drying results every time. If this setting is activated there
is no need to add rinse aid since this option disables
rinse aid dispensing. It also reduces the amount of salt
added to the water softener. Note that salt must be put
in the salt compartment.
3:00 (Off)
3:01 (On)
TAB
(3-in-1/all-in-one detergent)
3.
NOTE!
In order to achieve good dishwashing results, it is
essential to check which type of detergent or all-in-
one product best suits your needs! Read the deter-
gent packaging carefully for information on proper
use. Always follow the directions for use or informa-
tion on the detergent packaging!
33
EN