Cylinda DM 3038 FI, Руководство пользователя, Страница: 14 / 45

DISHWASHER / USER INSTRUCTIONS 13 / 44 EN
Preparation
If the hardness level of the water that you use is above 90°dF (French standard for water hardness) or if
you are using well water, than it is recommended to use filter and water purification devices.
* If the hardness level of the water that you use is below 8°dF (French standard for water hardness),
there is no need to use salt in your dishwasher. If this is the case, Salt Indicator (if any) illuminates
continuously on the panel of your machine.
If the water hardness is set to level 1, the Salt Indicator will illuminate continuously although it is not
necessary to use salt. If you use salt under this condition, salt will not be consumed and the lamp will
not illuminate.
WARNING:
If you move your house, it is very important to make the water hardness level adjustment of your machine
according to the new location you move in order to preserve the washing efficiency.
If the water hardness level of your machine is adjusted previously, your machine will display the most
recent hardness level adjustment. Adjust the new water hardness level of the machine based on the water
hardness level of the tap water.
Adjusting the water softening system
Washing performance will increase when water softening system is adjusted properly. Use the test stripe
supplied with the product to determine the supply water hardness in order to adjust the system.
Hardness
Level
English
Water
Hardness
°dE
German
Water
Hardness
°dH
French
Water
Hardness
°dF*
Water Hardness Level Indicator
1 st Level
0-5 0-4 0-8
Press the Time Delay key to switch the water hardness level to position 1.
2
nd
Level
6-9 5-7 9-13
3
rd
Level
10-15 8-12 14-22
Press the Time Delay key to switch the water hardness level to position 2.
4
th
Level
16-19 13-15 23-27
Press the Time Delay key to switch the water hardness level to position 3.
5
th
Level
20-24 16-19 28-34
Press the Time Delay key to switch the water hardness level to position 4.
6 th Level
25-62 20-50 35-90
Press the Time Delay key to switch the water hardness level to position 5.
15 0197 0100_ AA_EN
1 min.
1 Second
1
st
Level
2
nd
Level
3
rd
Level
4
th
Level
5
th
Level
6 th Level
Lime free
A little limy
Limy
Mediocre limy
High Lime
Very high
lime
1. After turning on the machine, press Time Delay and P+ keys simultaneously. After the countdown (3,2,1)
is displayed keep the keys pressed for a while.
2. Press P+ key to activate the position.
3. Using Time Delay key, adjust water hardness level according to the hardness of the supply water. See
“Water hardness level adjustment table” for correct setting.
4. Press On / Off key to save the setting.
Water hardness level adjustment table
A B C D E F
Unpack the test
strip.
Open the tap and
let the water flow for
approx. 1 minute.
Dip in the test strip
into the water for 1
second.
Take out the strip
from the water and
shake.
Wait for 1 minute. According to the result
obtained from the test strip,
adjust the water hardness of
the machine.