Operating Instructions | GPM 450 SPEED
25
Fig. 28: “WORKING CYCLE” Screen
The feeding wheels (29 start feeding sheets of paper into the machine. Do not load another pile of paper
onto the feeding table until the machine has processed the last paper, which automatically ends the
working cycle and the “WORKING CYCLE” Screen is displayed (Fig. 29). The working cycle can be
interrupted manually by pressing
STOP
. In case of emergency the machine can be switched off with the
big red
STOP
button (8).
Fig. 29: Working Screen
If the processing runs as you wish and you want to continue the job, replenish paper on the front table and
press
START
. If you need to correct the job, press
BACK TO SETTING
.
8.8 Manual Control
Manual control is mostly used when replacing the tools or when loosening jammed paper from the
machine. Press
(manual control) on the “SETTING” Screen (Fig. 20) and the following menu is
displayed (Fig. 30). Press the move forward/backward icons
,
next to the
MOVE ROLLERS
field to set
the machine’s rollers running. Icons
and
define the continuity of the run of the rollers.
– rollers are
turning only if the arrow is held.
– rollers start running and rotate until the icon is pressed again.
