Smart Control Button
User Manual
4 |
P a g e
6.
Select the Cygnett Smart Hub + IR Remote Control device in the Cygnett Smart app and select the ‘+’
icon.
7. Follow the in-app instructions. After your Smart Control Button has been registered, give it a name through
its Settings, and tap Complete.
8. Your Smart Control Button is now ready to be used.
With your Smart Control Button, you have the freedom to move it around your home. If you choose to mount/install
it on a surface, please use the included adhesive tape.
Firstly, remove the first layer on the adhesive and apply it on the bottom of your Smart Control Button. Proceed to
remove the layer on the other side and mount/install it on a clean and convenient location free from dirt within 40m
of your Cygnett Smart Hub + IR Remote Control by firmly pressing and holding down for 30 seconds.
For examples on where your can place your Smart Control button, please refer to the below.
*Cygnett Smart Hub + IR Remote Control is not included and is sold separately if the Smart Control Button is
purchased separately from the Cygnett’s Smart Home Starter Kit.
Maintenance & Disposal
Before any cleaning, remove your device from all power sources. To prevent any scratches from occurring, use a
soft dry cloth and do not use any cleaning agents.
