Page 2
INTRODUCTION
Before installing the device, read the following operating instructions. Installation may only be carried out by a
qualified person with the adequate qualifications.
This manual applies to the V4 Videomonitor which is part of the CC4000 system. The description of
programming and connecting with the rest of the system elements can be found in the
CC4000 System
Manual.
Videomonior and devices connected to it are only allowed to be powered with extra-low voltage (ELV) with a
value not exceeding the allowable safe contact voltage. Power devices (12V DC power supplies)
must
comply with EMC and safety standards in accordance with applicable European Union standards and ensure
full
galvanic isolation from the power grid.
Fig. 1 View of the videomonitor connectors
DESCRIPTION
OF
CONNECTOR
S
Zasilanie 12V power supply from a local power supply or DV-4 distributor
IN
Socket for connecting the DV-4 distributor
OUT
Socket for connecting another monitor
CAM1
Additional camera input 1
CAM2
Additional camera input 2
