CYCLOPS NOVA OSD, Руководство пользователя

Страница: 3 / 10

Connection
Connection Connection
Connection diagram
diagram diagram
diagram
Power jumper notice： there are 3 pins marked as above(pin 1,2,3), when the
jumper connects the pin 1 and 2, the OSD and the AV in(camera) and AV out(video
Tx)will be powered by the current sensor, also the power of your motor.
WARNING, in this situation, you motor lipo should be 3s,or you will damage the
OSD or your video devices.
When the jumper connects the pin 2 and 3, the current sensor just offer the voltage
info to the OSD board, you need to connect another 12v power (3s lipo for exaple)
to power the OSD and AV in and AV out.
So when you motor lipo is bigger than 3s, you must make sure the jumper connects
pin 2 and 3, another 12V power is used to power the OSD and your video devices.