7
V1.0
$GGUHVVLQJ
$OOÀ[WXUHVVKRXOGEHJLYHQD'0;VWDUWLQJDGGUHVVZKHQXVLQJD'0;VLJQDOVRWKDWWKHFRUUHFWÀ[WXUH
responds to the correct control signals. This digital starting address is the channel number from which
WKHÀ[WXUHVWDUWVWROLVWHQWRWKHGLJLWDOFRQWUROLQIRUPDWLRQVHQWRXWIURPWKH'0;FRQWUROOHU7KHDOORFDWLRQ
of this starting address is achieved by setting the correct number on the display located on the base of
the device.
<RXFDQVHWWKHVDPHVWDUWLQJDGGUHVVIRUDOOÀ[WXUHVRUDJURXSRIÀ[WXUHVRUPDNHGLIIHUHQWDGGUHVVIRU
HDFKÀ[WXUHLQGLYLGXDOO\
If you set the same address, all the units will start to listen to the same control signal from the same
FKDQQHOQXPEHU,QRWKHUZRUGVFKDQJLQJWKHVHWWLQJVRIRQHFKDQQHOZLOODIIHFWDOOWKHIL[WXUHV
simultaneously.
If you set a different address, each unit will start to listen to the channel number you have set, based on
the quantity of control channels of the unit. That means changing the settings of one channel will affect
RQO\WKHVHOHFWHGÀ[WXUH
,QWKHFDVHRIWKH35&ZKLFKLVFKDQQHOVÀ[WXUH,I\RXVHWIRUH[DPSOHWKHDGGUHVVLQWKH
channel mode to channel 2, the device will use the channel 2 to channel 3 for control.
1RWH$IWHUVZLWFKLQJRQWKHGHYLFHZLOODXWRPDWLFDOO\GHWHFWZKHWKHU'0;GDWDLVUHFHLYHGRU
QRW,IWKHUHLVGDWDUHFHLYHGDWWKH'0;LQSXWWKHGRWLQWKHGLVSOD\ZLOO
flash
.
Universal DMX Control
7KLVIXQFWLRQDOORZV\RXWRXVHDXQLYHUVDO'0;FRQWUROOHUWRFRQWUROWKHGLPPHUDQGVWUREH$'0;
controller allows you to create unique programs tailored to your individual needs.
Rotary control
This function allows you to control the dimmer of the PR-40C with the knob in the rear panel.
1. Press the MENU button and select “82/”.
2. Press the ENTER button.
3. $GMXVWWKHGLPPHUWKURXJKWKHNQRERQWKHSDQHOULJKWVWRS PD[LPXPRXWSXWOHIWVWRS ]HUR
output)
Dimmer
Focus
Zoom
