Cyclops Lighting FR-300W Скачать руководство пользователя страница 10

Страница: 10 / 16

V1.0

Main Menu

Press the MENU button to enter the Main Menu interface.

Addressing

All fixtures should be given a DMX starting address when using a DMX signal, so that the correct fixture

responds to the correct control signals. This digital starting address is the channel number from

which the fixture starts to listen to the digital control information sent out from the DMX controller. The

allocation of this starting address is achieved by setting the correct number on the display located on

the base of the device.

You can set the same starting address for all fixtures or a group of fixtures, or make different address for

each fixture individually.

If you set the same address, all the units will start to listen to the same control signal from the same

channel number. In other words, changing the settings of one channel will affect all the fixtures

simultaneously.

If you set a different address, each unit will start to listen to the channel number you have set, based on

the quantity of control channels of the unit. That means changing the settings of one channel will affect

only the selected fixture.

Содержание FR-300W
















