CyClone SC322, Инструкция по установке и эксплуатации

Страница: 39 / 40

39 Cyclone Canopy Installation - English
CONTROL PANEL
Timer
Light
Fan Speed Levels
LED Screen
1. Turn the machine on at any speed
2. To activate the timer after cooking, press the timer button
once. The screen light will begin flashing with a default of 3
minutes before turning off. To set the timer, press the lowest
fan speed setting to toggle the desired timer up to 9 minutes.
Note: The power setting that is being used prior to setting
the time delay will be the final setting used when the time
delay option has been activated. Power settings cannot be
adjusted once the time delay option has been set.
3. Using the power level one button, set the time delay option in
minutes for the machine to automatically shut off by pressing
the button until the desired time is reached.
4. If you do not wish to activate the time delay option simply
press the timer button twice to shut machine off.
To Engage Time-Delay Off Functions:
MAINTENANCE
• Always switch off power and unplug before cleaning and
maintenance.
WARNING
Surface and Filter Cleaning:
Clean with warm soapy water and a clean cloth. Do not use corrosive
or abrasive detergent or steel wool pads that can scratch the surface
of the machine.
Use non-abrasive stainless steel polish to buff out the luster and
grain. Scrub lightly.
The stainless steel filters trap residue and grease from cooking.
The filters should never have to be replaced but should be cleaned
thoroughly every 30 to 60 days depending on cooking habits.
Filters may be placed in the dishwasher on low heat or soaked in
warm, soapy water.
Spray degreasing detergent and leave to soak if heavily soiled.
Replacing Lightbulbs:
• Always switch off electrical supply before carrying out any
operation on the appliance.
• In order to prevent the risk of personal injury, the halogen
lamps must be cooled before removal.
WARNING
This range hood requires two halogen bulbs. (G4 Type JC, 12V,
20W Maximum)
1. Use a slot-head screwdriver to dislodge the bulb cover. Remove
the bulb from the socket.
2. Replace with G4 Type JC, 12V, 20W Maximum, halogen bulb.
3. Replace the light bulb cover by inserting the two prongs into
the slots and insert back into place.
For a complete description of our maintenance and operating instructions you may visit us online at
www.CycloneRangeHoods.com to download your model’s Use and Care Guide.
Due to the fact that we are always striving to improve our products and take advantage of advances in technology there may
be slight variations in your product.