cycliq Fly12 CE122, Руководство пользователя

Страница: 12 / 31

12 of 31 Fly12 CE122 User Guide |
Using your Fly12
Before your first ride
Please follow all the below steps before going out
on your first ride with your Fly12.
1. Fully charge your Fly12 – see page 8
2. Ensure the microSD is inserted – see page 9
3. Ensure the Fly12 port door is securely closed.
4. Ensure the safety tether is correctly attached - see page 10
5. Ensure the date and time stamps are synced - see page 23
Turning on your Fly12
Press and hold the power button (for approximately 2 seconds) until
the power on chime is heard - then release.
Power level ‘beeps’ will sound, indicating the battery status - see section
on Battery Level Indicators on page 8.
Turning off your Fly12
Press and hold the power button (for approximately 2 seconds) until
the power off chime is heard - then release.
Power level ‘beeps’ will sound, indicating the battery status - see section
on Battery Level Indicators on page 8.
Light modes
You can cycle through the available light modes using
the power button as follows:
• Camera Only (Main led off)
• Constant Mode High
(Main LED Solid with high intensity)
• Constant Mode Medium (Main LED Solid with medium intensity)
• Constant Mode Low (Main LED Solid with low intensity)
• Flash Mode High (Main LED flashing with high intensity)
• Flash Mode Medium
(Main LED flashing with medium intensity)
• Flash Mode Low (Main LED flashing with low intensity)
• Pulse Mode High (Main LED pulsing with high intensity)
• Pulse Mode Medium (Main LED pulsing with medium intensity)
• Pulse Mode Low
(Main LED pulsing with low intensity)
All light modes are available by default but can be customised via the
CycliqPlus app so that only the preferred modes are available.

Note
To maximise battery life, select a lower intensity light mode and turn off the
Fly12 when not in use. The light mode and intensity will be remembered when
you power off the Fly12. The next time you power on the Fly12 it will resume
with the previously used light mode and intensity. Consider bicycle light
regulations in your area when setting your light modes.