cycliq Fly12 CE122, Руководство пользователя

Страница: 10 / 31

10 of 31 Fly12 CE122 User Guide |
Mounting your Fly12 to your bike
The Fly12 comes with a Handlebar Mount and a Universal Adaptor
that feature the Cycliq 1/8th turn quick release system.
1. With the Fly12 facing forward, and
at a 45° angle, line up the quick
release male component on the
Fly12 with the female receptor on
the Handlebar Mount. Place the
Fly12 into the mount and make a
1/8th turn until the device clicks
into a forward-facing position. The
distinctive ‘click’ sound confirms
the unit has been locked in place.
2.
1. Place the Handlebar Mount above
or below the handlebar, depending
on available space. If mounting to a
22.2mm bar install the appropriate
rubber adapter then carefully
torque hex bolts to a max of 2Nm.
1.
Attaching the safety tether to your Fly12
1. On the back of the Fly12 there are two slots for the Safety Tether
to be attached through.
2. Thread the thinner part of the tether through the slots, then thread
the other end through the loop to secure the tether.
3. We recommend always using the Fly12 with the Safety Tether
attached and secured around the handlebar or stem.
Tether Slot

Note
If installing using the Universal Adaptor and a finned style mounting sytem,
the process of operating the 1/8th turn is the same as above.
The Fly12 auto locks its recording orientation in the first 10 seconds of
recording and will remain recording in that orinetation for the remainder
of the ride.