cycliq Fly12 CE122, Руководство пользователя

Страница: 8 / 31

8 of 31 Fly12 CE122 User Guide |
Setting up your Fly12
Charging your Fly12 battery
Your Fly12 comes partially charged. Before using it
for the first time, please charge the Fly12 fully.
To charge:
1. Connect the Fly12 to a USB wall charger (not supplied)
using the supplied USB cable.
2. The charge indicator LED will illuminate red showing that
the Fly12 is charging.
3. The charge indicator LED will illuminate green when the
Fly12 is fully charged.
You can charge the Fly12 using the supplied USB cable and your computer,
however this will significantly reduce the rate of charge. For the quickest
charge, use a USB power adapter that supports USB fast charge
(5V @ 2.1A).

Note
The Fly12 is ‘Fast Charge’ compatible and accepts up to 2.1amps. Accordingly,
the time to charge from flat to fully charged varies from 2.5 to 8 hours
depending on the method of charging, i.e. mains power USB at 2.1A (not
supplied) vs computer USB (at as little as 0.5A). Battery life will diminish over
time and charge cycles.
Battery level indicator
When turning on the Fly12, an audible battery alert will sound, alerting you to
the current battery level. This will indicate whether you have enough power
for your next ride. See below for audible notification guide:
4 rapid high pitched beeps = 75% to 100% charged
3 rapid high pitched beeps = 50% to <75% charged
2 rapid high pitched beeps = 25% to <50% charged
1 rapid high pitched beep = 12% to <25% charged
3 long high pitched beeps = Less than 12% charged