CycleOps 100 PRO, Руководство пользователя

Страница: 5 / 90

4
7. Carefully slide the handlebar assembly
onto the handlebar post. Secure the
plastic end cap to the handlebar post
using two end cap screws with the
Phillips screwdriver side of the 6mm Allen
wrench. 8. Once the handlebar is in place, secure it
with the small L handle on the right side
of the indoor cycle (chain guard side).
O
K
H
D
Small L
handle
Handlebar post
Handlebar
End cap
Attach Seat
G
A seat has been included with the CycleOps Pro Series indoor cycle. If desired, the indoor cycle can accommodate an off-the-shelf
seat to personalize the fi t, feel and ride. In some instances, a shorter seat post clamp is required for individuals under fi ve feet tall.
If desired, contact Saris Cycling Group to purchase the short seat clamp.
3. Attach the seat post clamp to the seat
post. Once the seat is level, properly
tighten with the small L handle. 2. Insert seat post into the seat tube and
secure it by inserting the large L handle
into the main frame assembly on the
right side of the indoor cycle (chain
guard side).
Seat post
clamp
O
Small L
handle
E
Seat post
1. Remove 6mm bolt in main frame as-
sembly using 6mm Allen wrench. The
6mm bolt can be kept in place of the
large L handle for a more permanent
placement of the seat post height.
O N
Small L
handles
Large L
handles
Push
Rotate
9. Push black button and rotate handle on
small and large L handles to position the
handle without tightening. Release the
button and allow the handle to seat to
tighten or loosen an adjustment.
C
Main frame
assembly
N
Large L
handle
C
Main frame
assembly
E
Seat post