Step-3: Secure Amplifier Harness to Frame
Once the amplifier bracket is attached, secure the amp harness to the frame
using the supplied wire ties
(12)
making sure to keep wiring away from moving
parts and high temperature heat sources such as the exhaust and engine covers.
Step-4: Attach Speakers to Handlebars
There are a couple of different ways to mount the bullet speakers depending on
what series speakers you are installing and what type of bike is being installed
on.
Blue Loctite is always recommended on the speaker bolts
so they don
ʼ
t
come loose easily.
A) Using P-Clamps:
To install speakers using p-clamps
(2)
, separate the 2
halves of the clamps and place around the handlebar in the desired location
(figure 4-1)
. If you are using the
Combo 1-1/4” P-Clamp w/ Shim
on a 1”
handlebar simply spread the provided shim around the bar before clasping
the p-clamp around the bar
(figure 4-3 & 4-4)
. Holding the p-clamp together
place the screw through the clamp into the speaker as shown in
figure 4-2
.
Once in the desired location tighten each speaker mounting screw.
Fig. 4-1 Fig. 4-2
Fig. 4-3 Fig. 4-4
