6
Step 5: Attaching the lift to the vehicle
Wrap the loop strap around the top rack, bumper or other location that is suitable to
support the weight of the plow.
Connect the loop strap to the adjustable lift strap using the snap pin.
Connect the wire leads from the control box harness to the wire leads from the lift motor.
CAUTION!
TO PREVENT INJURY OR DAMAGE TO THE VEHICLE OR THE STRAPS:
Do not wrap nylon strap across sharp edges.
Do not allow the nylon straps to rub against the body of the vehicle.
Do not adjust or try to release straps under tension.
Front
Rack
Lift
Strap
Loop
Strap
Connect
Wire
leads
Snap
Pin
Press to
release
Figure 4
Pull to
adjust
