Cycle Country 25-5193, Инструкция по сборке и эксплуатации

Страница: 7 / 10

7
4000 LB. WINCH
MOUNTING INSTRUCTIONS

Be sure that when the winch is mounted to the UTV the winch motor is on the
RIGHT side of the machine. Align the winch and the roller hawse mount plate that
came with the winch, with the holes noted on drawing below and attach the winch
with the four bolts provided with the winch. The roller hawse mount plate that
came with the winch mount kit will not be used.

Install a 3/8” x 1” bolt and nylock nut through holes noted below. The other 3/8”
bolt and nylock nut will not be used.

GO TO NEXT INSTRUCTION.
5. Install Roller Hawse
Remove one of the long rollers and the two side rollers and feed the winch cable
through the roller hawse. Reinstall the rollers and be sure rollers move freely.
Attach the roller hawse to the roller hawse mount plate using the 3/8” x 1” bolts and
nylock nuts provided with the winch. Tighten all hardware.
See Winch Wiring Instructions supplied with the Winch for proper installation.