Cyclades AlterPath OnBoard, Руководство администратора

Страница: 88 / 460

Understanding OnBoard Notifications and Sensor Alarms
52 AlterPath OnBoard Administrator’s Guide
Tasks for Configuring Routes
The following table lists the tasks for configuring routing, and either lists the
sections where the tasks are documented or provides the related
cycli
utility
parameters.
Understanding OnBoard Notifications and
Sensor Alarms
The OnBoard administrator can configure alarms of two different types
using
either the Web Manager or the
cycli
utility.
The alarms may be triggered
by the either of the following:
• System daemons (such as messages from the
cron
daemon,
crond
)
• Out of range sensor readings from sensors on service processors
Table 1-23: Tasks for Configuring Routes
Task Where Described/Description
Assign a default route
(Web Manager}
• “Configuring Network Interfaces” on page 233
• “To Configure OnBoard Network Interfaces” on page 237
Assign a default route
(
cycli
)
On an already-active network interface:
cli> set network interface
interface_name \
gateway
gatewayIP
Assign a host or
network route {Web
Manager}
• “Configuring Static Routes” on page 244
• “To Add a Static Route” on page 245
Assign a host or network
route
(
cycli
)
On an already-active network interface:
•
set network st_routes
hostIP
OR
•
set network st_routes st_routes
networkIP /
NN