CYBEX Big Iron 19041 Скачать руководство пользователя страница 14

Maintenance

All preventive maintenance activities must be performed on a regular basis. Performing routine preventive
maintenance actions can aid in providing safe, trouble-free operation of all Cybex equipment.

Cybex is not responsible for performing regular inspection and maintenance actions for your machines.
Instruct all personnel in equipment inspection and maintenance actions and also in accident reporting
and recording. Cybex representatives are available to answer any questions that you may have.

Warnings

Read all warnings in this chapter.

For maintenance, service and repair:
• Must be performed by trained service personnel only
• Use only Cybex replacement parts.

Equipment hazard. To avoid serious injury or death replace worn or damaged
components immediately and keep the equipment out of use until repair is
completed.

Daily Procedures

When using strong cleaning agents such as rubbing alcohol or bleach, it is advisable to test first in an
inconspicuous area. Other cleaning agents may contain harsh or unknown solvents and are subject to
formula changes by the product manufacturer without notice. Should you desire to use other cleaning
agents, carefully try them in an inconspicuous area to determine potential damage to the material. Never
use harsh solvents or cleaners which are intended for industrial applications. To clean stained or soiled
areas, a soft white cloth is recommended. Avoid use of paper towels.

Cleaning products may be harmful/irritating to your skin, eyes, etc. Use protective gloves and eye
protection.

Do Not

inhale or swallow any cleaning product. Protect surrounding area/clothing from

exposure. Use in well ventilated area. Follow all product manufacturer’s warnings. Cybex and its vendors
cannot be held responsible for damage or injuries resulting from the use or misuse of cleaning products.

Clean Upholstery

Then

If

1.

Prepare a solution of 10% household liquid soap and warm water.

2.

Apply with a soft damp cloth.

3.

If necessary, apply a solution of liquid cleanser with a soft bristle brush.

4.

Dampen a clean soft cloth in water and wipe residue away.

Light Soiling

Page 14 of 19

Big Iron 19041/19051 Power Rack Part Number 19041-999-4 C

Содержание Big Iron 19041





















Отзывы: