Shenzhen Zhiyong Electronics Co., Ltd
9
PS: When Scan Measure Time≥500ms (1000ms Maximum), QP line test will be automatically added, or
the system will only scan PK and AV line. The Scan MT = 1 sec in the picture shown above, so the test
result includes three curves, AV, QP and PK
②
Edit and analyze the scan result
Under receiver main menu, click
button to enter scan curve edit interface as
shown below:
Mark
Num.
Description
1
Move the cursor: directly type in the frequency point you want to add or check, the cursor will
show the corresponding location data according to the input.
2
Look for peak value: Looking for the peak value on curve, click again to realize the auto
3
Add the frequency point where cursor located into the data sheet
4
Delete the frequency point selected in the sheet
5
Mouse: standard status, Functions marked by 1, 2, 3, 4 can be execute for the magnified area
Mouse: view status, Curves can be magnified by the mouse.
6
Back to the previous menu
③
Final Test
Press
button to proceed to final test to the points in the sheet, testing PK, AV, QP
value. Test time can be set in Final MT. Final test will be invalid if there’s no exceed point or testing
point manually added. ATTENTION: Do not turn off the EUT during Final Test.
CYBERTEK
