Shenzhen Zhiyong Electronics Co., Ltd
For your safety
Please strictly follow the safety tips below. If you don’t follow the instruction, the potential
consequences could damage the machine or hurt the users. We will not be responsible for any problem
caused by violating the rules
Make sure the product is used in rated voltage and current range.
Do not open the shell or try to connect cable during operation
Do not use the probe in moist or combustible environment
Make sure the device is dry and clean before using.
If there’s anything wrong with the product, please contact us immediately. Do not open the shell and
try to repair the machine or worse incident could occur.
1. Summary
CP1000A
current probe is used for alternating current testing. The current under test reaches effective
value of 1000A, peak value of 2000A, bandwidth of 100 kHz. Clamp diameter is around 54mm. With its
standard BNC output port, CP1000A can be connected to the oscilloscope of any brand. It has three optional
ranges and test small current easily. The additional optional accessories BNC to banana plug can realize the
connection with digital multi-meter. CP1000A can be widely used in the testing like motor drive, inverter,
power switch and avionics.
2. Product and Accessories
Clamp description
1.
Clamp:
used to fix the cable under test, diameter around 54mm
2.
Range selection: provide three ranges:
10A(100mV/A), 100A(10mV/A),
1000A(1mV/A)
Warning
CYBERTEK
