2.4G 54Mbps Wireless AP User's Manual
11
3. Wireless Navigator Installation
Install the Wireless Navigator
The Wireless Navigator Utility is provided to allow user easily to configure the Ethernet
Bridge through any Windows-based PC. This section describes procedures for installing the
Wireless Navigator Utility to PC.
Note!
Please make sure that your PC already has TCP/IP protocol installed. If not, please
contact your administrator for details if you have problems of setting up this TCP/IP
protocol in your PC.
Note!
Even your Ethernet Bridge is not connected with PC, but other Ethernet device, such
as printer server. You still can install the Wireless Navigator in any PC located in the
same IP subnet with the Ethernet Bridge. This utility can search the Ethernet Bridge
via both wired and wireless Ethernet so that you still manage the Ethernet Bridge
remotely.
Step 1:
Insert the installation CD-ROM into the CD-ROM drive. Run SETUP.EXE program
on the CD-ROM. The following window will be shown automatically.
