CyberResearch STH 15B Series, Руководство пользователя

Страница: 113 / 130

User Manual version 4.11
STH 15B Series
9-101
9.1.4.Installing MonitorMouse for Windows system
1. Turn on your computer.
2. To install the software, insert the Driver CD. The path as
x:\Drivers\ Touch\ Elo Touch\ (X = CD drive letter )
3. Open one folder which same as your operating system.
4. Double click the only one file in this folder and Unzip to a
folder such as “c:\EloWin9X”.
5. Chang e to “c:\EloWin9X” double click setup.exe.
6. Following the instructions on the screen.
7. The Touch screen Setup Wizard will appear. You will
need to specify the type of touch screen controller you
are using and how it is connected.
Control type: serial
SmartSet:
2xx0
COM port: COM3
8. Complete the Setup program.
9. Restart your system.
10. Click the Start button, then click Settings, and then click
Control Panel .
11. Double-click Elo Touch screen to run the Touch screen
Control panel.
12. Click the Calibrate button and touch each of the three
targets as they appear on the screen. Click Yes when the
cursor lines up correctly with your finger. Click OK to
close the Touch screen Control panel.
NOTES
‹
Full-screen DOS mode is not supported. However,
Windowed DOS mode is fully supported. A touch to a
full-screen DOS session will cause your system to
immediately return to your Windows desktop. A mouse
can be used to access programs run in full-screen DOS
mode.