CyberResearch GFC 1508B, Руководство пользователя, Страница: 33 / 44

Usage
The power on state of
GFC 1
508B
:
When you power on
G
FC 1508B
it will prompt for a password, the default password value is
eight zero s – “ 00000000 “ . Please key in eight zero s and enter the same value in retype field.
Note: You may want to consider keeping the default password (00000000) until you are
completly familiar with the unit.
Please write down your password and keep it in a safe place.
LED Indication:
When you select one of
eight
PC ports and th
e
PC is powered on, the selected port
's
LED
lights
.
When you select one of
eight
PC ports and its corresponding PC is shut down or disconnected,
the
selected port
's
LED will flash.
Reset Button ( (Bank Select) and (Port Select) ):
Pressing both “select” button and “bank” button on the master bank simultaneously will
reset GFC
1508B
. This reset will return GFC
1508B
to its default condition. Check the
password and all of slave banks connected to the
GFC
1508B
.
If you add a new GFC 1
508B
as a slave bank, please use reset button of master GFC
1508B
to
automatically assign a new ID to it. You can view this new slave bank through the OSD menu.
The PC ports of GFC
1508B
are not reset by the R eset command.
Keyboard Hot Key Commands:
You can also command the
GFC 1508B
by switching ports through a hot key
sequence. To send commands to
the GFC
1508B
the “SCROLL LOCK” key must be pressed
twice within 2 seconds. When you hear a confirmation beep, the keyboard is in hot key
mode. If you have not pressed any key in hot key mode within 2 seconds
the keyboard will
revert to Operation System control state.
Below are the different hot key commands:
within 2 seconds
+ + = Previous Channel
Scroll
Lock Scroll
Lock
Ĺ
CyberResearch
®
PC Accessories
GFC 1508B & GFM 1501
CyberResearch, Inc . 2
7
25 Business Park Drive P: (203) 483-8815; F: (203) 483-9024
Branford, CT USA www.cyberresearch.com