C
Y
RAQ
®
24J Series
CyberResearch
®
Displays
3.1.2 Portrait Installation
Note
: Follow Rack-Mount Gasket Installation procedure (if necessary) prior to beginning
the steps below.
1.
Align mounting plate rack-mount holes with server rack mounting holes; see
Figure 3 for correct mounting orientation.
Ensure gasket faces outward.
2.
Install the eight 10-32 1/2
″
button head bolts into rack-mounting holes to secure
mounting plate to the server rack.
Note
: Steps 3 & 4 require two people.
3.
Align studs with the monitor mounting holes in mounting plate and install the
C
Y
RAQ
®
until the gasket is flush with rear of enclosure.
Important!
Do not exceed 30 in/lbs when tightening mounting nuts.
4.
From inside rack, a second person must install and tighten the fourteen 10-32
mounting nuts.
Figure 3: Rack-Mount Portrait Installation
12 ©
Copyright 2011
CyberResearch, Inc