CyberResearch CVBF 21C, Руководство пользователя, Страница: 31 / 64

CyberResearch
®
Displays
C
Y
RAQ
®
21
2.6 Connecting the Display
IMPORTANT!
Before connecting the power cable to the display, connect all the other
cables.
Figure 18: CYRAQ 21C Connection Layout
Power
Jack
DVI Video
Port
Analog
Video Port
S-Video
Composite
Video
3
N
OTE
: Turn off the computer before connecting the display
1. After connecting all other cables, connect the power cable to the power jack on
the back of the display; refer to Figure 18.
2. Press the On/Off Button, the status light will illuminate.
3. Start the computer.
4. If the computer is running, restart.
5. The display should now function normally.
3
N
OTE
: See Section 4 Touchscreen for connection and driver instruction
3
N
OTE
: If the C
Y
RAQ’s screen remains blank or displays the error message
“Out of Range” or “No Input Signal,” there may be a connection or
signal problem. One, or a combination of the possibilities listed below
may be the cause:
¾ Windows resolution is set either too high, or too low for the display;
check the resolution by reinstalling the old display
CyberResearch, Inc
.
23
25 Business Park Drive P: (203) 483-8815; F: (203) 483-9024
Branford, CT USA www.cyberresearch.com