CyberResearch CPEN GX-333-X, Руководство пользователя, Страница: 58 / 98

CPEx GX-333-X CyberResearch
®
CPU Cards
56 ©Copyright 2007 CyberResearch, Inc.
Standard CMOS Features
The Standard CMOS Features menu allows you to set basic BIOS configuration options.
The Standard CMOS Features menu allows you to set both the date and the time field:
1. Date [mm:dd:yy] : Allows you to set the system date.
2. Time [hh/mm/ss]: Allows you to set the system time.
Î
IDE Primary Master and Slave
When entering setup, BIOS auto detects the presence of IDE devices. This displays the status of
the auto detected IDE devices. The following IDE devices will be detected and are shown in the
Standard CMOS Features menu:
1. Primary IDE Master
2. Primary IDE Slave
The IDE Configuration menu allows you to set or change the configurations for the IDE devices
installed in the system. If an IDE device is detected, and one of the above listed BIOS
configuration options are selected, the IDE configuration options shown in
Section
0
appear.
Î
Drive A [1.44M, 3.5in]
The Drive A configuration option determines the type of floppy drive installed in the system. The
floppy drive configuration options are listed below.
1.
None
2.
1.44M, 3.5 in (D
EFAULT
)
Î
Video [EGA/VGA]
The Video configuration option determines the type of display connected to the system. The
video display options are listed below. Basically this item should be left unchanged.
1. EGA/VGA
2.
CGA 40
3.
CGA 80
4. MONO
Î
Halt On
The Halt On category allows users to determine whether the computer will stop if an error is
detected during power up.
Î
All Errors (D
EFAULT
) Whenever BIOS detects a non-fatal error the
system will be stopped and you will be
prompted.
Î
No Errors The system boot will not be stopped for any
errors that may be detected
Î
All, But Keyboard The system boot will not stop for a keyboard
error; it will stop for all other errors.
Î
All, But Diskette The system boot will not stop for a disk error;
it will stop for all other errors.
Î
All, But Disk/Key The system boot will not stop for a keyboard
or a disk error; it will stop for all other errors.