CyberResearch CEGA PD-24-X, Руководство пользователя

Страница: 94 / 234

CEGA Series CyberResearch
®
CPU Cards
74 © Copyright 2007
CyberResearch, Inc
Figure 5-9: Keyboard/mouse Y-cable Connection
Step 4: Attach PS/2 connectors to the chassis . The keyboard/mouse Y-cable
connector is connected to two PS/2 connectors. To secure the PS/2 connectors
to the chassis please refer to the installation instructions that came with the
chassis.
Step 5: Connect the keyboard and mouse . Once the PS/2 connectors are connected
to the chassis, a keyboard and mouse can each be connected to one of the
PS/2 connectors. The keyboard PS/2 connector and mouse PS/2 connector are
both marked. Please make sure the keyboard and mouse are connected to the
correct PS/2 connector. Step 0:
5.6.4 Single RS-232 Cable Connection
The single RS-232 cable consists of one serial port connector attached to a serial
communications cable that is then attached to a D-sub 9 male connector that is mounted
onto a bracket. To install the single RS-232 cable, please follow the steps below.
Step 1: Locate the connector . The location of the RS-232 connector is shown in
Chapter 3 .
Step 2: Insert the cable connector . Insert the connector into the serial port box header.
See Figure 5-10 . A key on the front of the cable connector ensures the
connector can only be installed in one direction.