Functional Test
AC Mode
The UPS delivers power to the loads derived from the utility and maintains proper battery charge. It also
regulates the output voltage to within a narrow range.
On-Battery Mode
The UPS operates on battery when the line voltage or frequency has fallen outside the limits. Local
users are alerted to this mode of operation by visual and audible indicators. The UPS provides power to
the load from the battery and through its inverter and the output voltage and frequency of the UPS are
regulated within a narrow range
1. Switch
On
Press the power switch on the top panel then the “power on” LED will light up.
2. Switch
Off
Press again the power switch, the “power on” LED on the top panel will go off.
3.
Cold Start / Start on Battery:
This UPS can be turned on even when AC is not present.
Press the power switch on the top panel then the “power on” LED will light up.
ROUTINE MAINTENANCE AND STORAGE
ROUTINE MAINTENANCE
1.
Use dry soft clothes to clean the top panel and plastic parts. Do not use any detergent that contains
alcoholic ingredient.
2.
The expected lifetime of the battery is around 3 years. Improper operation and harsh environment
will reduce the actual lifetime.
3.
Unplug the UPS from power inlet if the UPS will not operate for long period of time.
STORAGE
1.
First turn off your UPS and disconnect its power cord from the wall outlet. Disconnect all cables
connected the UPS to avoid battery drain.
2.
The UPS should be stored in a cool dry location.
3.
Make sure the battery is fully charged before the UPS is stored.
4.
For extended storage in moderate climates, the battery should be charged for 12 hours every 3
months by plugging the power cord into the wall receptacle. Repeat it every 2 months in high
temperature locations.
TROUBLE SHOOTING
Problem
Possible Cause
Solution
The battery is not fully
charged.
Recharge the battery by leaving the UPS
plugged in.
The UPS does
not perform
expected
runtime.
The battery is slightly worn
out.
Contact CyberPower Systems at
[email protected]
The on/off switch is
designed to prevent
damage by rapidly turning it
off and on.
Turn the UPS off. Wait 10 seconds and
then turn the UPS on.
The unit is not connected to
an AC outlet.
The unit must be connected to a
220-240V 50/60Hz outlet.
The battery is worn out.
Contact CyberPower Systems at
[email protected]
The UPS will not
turn on.
Mechanical problem.
Contact CyberPower Systems at
[email protected]
The circuit breaker is
tripped due to overload.
Turn the UPS off and unplug at least one
piece connected equipment. Unplug the
power cord of the UPS then remove the
fuse compartment beneath the power inlet
of the UPS and replace the blown fuse
with a spare one. Lock the compartment
back to the UPS. Connect power cord
then turn the UPS on. Make sure that your
spare fuse meets the specification.
The battery is discharged
Allow the unit to recharge for at least 4
hours.
Outlets do not
provide power to
equipment
The unit has been damaged
by a surge or spike.
Contact CyberPower Systems at
[email protected]
The USB cable is not
connected.
Connect the USB cable to the UPS unit
and an open serial port on the back of
the computer. You must use the cable
that came with the unit.
The USB cable is
connected to the wrong
port.
Try another USB port of your computer.
The unit is not providing
battery power.
Shutdown your computer and turn the
UPS off. Wait 10 seconds and turn the
UPS back on. This should reset the unit.
PowerPanel
®
Personal Edition
is inactive (all
icons are gray).
The serial cable is not the
cable that was provided with
the unit.
You must use the cable included with the
unit for the software.
TECHNICAL SPECIFICATIONS
Model
BR 450ELCD
BR 650ELCD
BR 850ELCD
Capacity (VA)
450VA
650VA
850VA
Capacity (Watts)
270W
390W
510W
Input
Input Voltage Range
165-270Vac
Frequency Range
50/60 Hz+/-3Hz (Auto Sensing)
Output
On Battery Output
Voltage
Simulated Sine Wave at /-10%
On Battery Output
Frequency
50/60 Hz +/-1%
Overload Protection
Yes
Physical
Total # of UPS
Receptacles
Schuko*6 (3 for battery backup and surge ;3 for surge )
Dimensions(mm) 271(L)
x160.7(W)
x113.6(H)
Weight (kg)
4.4
5.5
6.4
Battery
Sealed Maintenance
Free Lead Acid Battery
12V / 4.5Ah x1
12V / 7Ah x1
12V / 9Ah x1
Typical Recharge Time
8 Hours
Warning Diagnostics
Indicators Power
On
Audible Alarms
On Battery, Low Battery, Overload
Environmental
Operating Temperature
+32
°
F to 104
°
F ( 0
°
C to 40
°
C )
Operating Relative
Humidity
0 to 85% NON-CONDENSING
Communication
PowerPanel
®
Personal
Edition Software
Windows2000/NT/XP/Server 2003/Vista/Mac OSX,Linux
Management
Auto-Charger Yes
Auto-Restart Yes
USB Interface
Yes
Other Features
Green Power
Yes (Energy saving technology)
Batter Charger
External AAA/AA battery charger, connection via USB charger
DEFINITIONS FOR ILLUMINATED LCD INDICATORS
LCD Indication
Line mode
UPS Status Display
Capacity Display
Digital Value Display
Select SW
Press
Load
Cap.
Battery
Cap.
Input
Voltage
Output
Voltage
Run
Time
%
of Load
%
of Batt.
Initial
V X -- X V
X
V
1st
V X -- X V
X
V
2nd
V X -- X V
X
V
3rd
V X -- X X
V
V
4th
V X -- X V
X
V
5th(Return)
V X -- X V
X
V
Press >3sec
(Sound Disable)
V
X
V
X
-- -- -- -- -- -- --
Press >3sec
again
(Sound Enable)
V
X
X
X
-- -- -- -- -- -- --
(Overload) V
X
--
V
-- -- -- -- -- -- --
“V” : Illuminated, “X” : Not Illuminated, “--“ : Either
Battery mode
UPS Status Display
Capacity Display
Digital Value Display
Select SW
Press
Load
Cap.
Battery
Cap.
Input
Voltage
Output
Voltage
Run
Time
%
of Load
%
of Batt.
Initial
X V -- X X
V
V
1st
X V -- X X
V
V
2nd
X
V
--
X
V X V
3rd
X V -- X X
V
V
4th
X V -- X X
V
V
5th(Return)
X V -- X X
V
V
Press >3sec
(Sound Disable)
X
V
V
X
-- -- -- -- -- -- --
Press >3sec
again
(Sound Enable)
X
V
X
X
-- -- -- -- -- -- --
(Overload) X
V
--
V
-- -- -- -- -- -- --
“V” : Illuminated, “X” : Not Illuminated, “--“ : Either
For more information, visit eu.cyberpowersystems.com or contact
CyberPower Systems B.V.
Flight Forum 3545 5657DW Eindhoven The Netherlands
Tel: +31 40 2348170, E-MAIL: [email protected]
CyberPower Systems Inc. (USA
) 4241 12th Avenue East Suite 400 Shakopee, MN 55379, U.S.A.
Tel: +1 952 4039500, Fax: +1 952 4030009, E-MAIL: [email protected]
Entire contents copyright ©2008 CyberPower Systems B.V., All rights reserved. Reproduction in whole
or in part without permission is prohibited. PowerPanel
®
Personal Edition is the trademark of
CyberPower Systems Inc.
CyberPower warrants to you, the original purchaser, that CyberPower UPS will be free from defects in
design, assembly, materials and workmanship for two years ( battery is only one year) from the date of
original purchase. Any warranty services, please contact your local dealers or distributors.
