CyberPower UP625, Руководство пользователя

Страница: 10 / 16

DEFINITIONS FOR ILLUMINATED LED INDICATORS
Power
On
Wiring
Fault
Using
Battery
Circuit
Breaker Alarm
Condition
On Off Off Set Off Normal
Off On/Off On Set
Two
Beeps
Utility Failure- The UPS is providing battery power
to the Battery-Power Supplied outlets.
Off On/Off On Set
Rapid
Beeps
Utility Failure- The UPS is providing battery power.
The rapid beeps indicate the battery will run out of
charge within a few minutes.
Off Off On Up
Two
beeps
or
rapid
beeps
Overload- Occurs in the Full-time Surge Protection
Outlets. Turn the UPS off and unplug at least one
piece of equipment from the UPS. Wait 5
seconds, reset the circuit breaker and turn the
UPS on.
Off On/Off On/Off Set
Long
Beep
Overload- Occurs in the Battery-power Supplied
Outlets. Turn the UPS off and unplug at least one
piece of equipment from the UPS. Wait 5
seconds, reset the circuit breaker and turn the
UPS on.
On/Off On On/Off Set/Up None
Electrical Wiring Fault- This indicates a wiring a
problem such as a bad ground, missed ground or
reversed wiring within the AC outlet. User is
advised to disconnect all electrical equipment from
the outlet and have the outlet checked by an
electrician.
LIMITED WARRANTY AND POWER CONTROL GUARANTEE
In purchasing UP625/ UP825 in the United States or Canada, the original end user receives
a Limited Warranty and CyberPower's Power Control Guarantee from CyberPower Systems
(USA), Inc. (for ease of reading, referred to as "CyberPower"). The Limited Warranty and
the Power Control Guarantee are intended to be the initial end-user's exclusive rights and
remedies. The Limited Warranty and the Power Control Guarantee are separate, all though
they are related.
Limited Warranty
. The original end user (referred to as the "Initial Customer") receives an
express limited warranty for the UP625 / UP 825 (referred to as the "Limited Warranty"),
purchased from CyberPower (referred to as the "Product"). The Limited Warranty is for the
Product itself. The terms of the Limited Warranty are explained below.
Power Control Guarantee
. CyberPower also provides the Initial Customer with protection
in the event that the Product is not free from defects in materials and workmanship, and
certain equipment connected to the Product is damaged (the "Power Control Guarantee").
The Power Control Guarantee protects the Initial Customer for damage to equipment
plugged into the Product. The terms of the Power Control Guarantee are explained below.
The Limited Warranty and the Power Control Guarantee are subject to the terms set forth
8